1～8 件を表示 ／ 全 8 件
Cost-effective fastening with plastic nails.
◆Applicable Base Materials - Concrete - Lightweight concrete porous blocks - Vertical hole bricks - Hole-punched limestone bricks ◆Applications Fastening the following insulation materials to facades, etc.: - Polyurethane boards - Wood wool lightweight building material boards - Cork boards / coir mats - PU panels
Installation inside insulation to reduce heat bridges.
◆Applicable Base Materials - Bead method polystyrene foam (EPS) type - Extruded polystyrene foam (XPS) type - Wood fiber type - Rigid polyurethane foam type - Rock wool, etc. ◆Features - Dedicated fastening for direct installation to insulation materials, designed to reduce thermal bridging. - FID ii shape allows for easy installation without pre-drilling through a thin mortar layer, shortening the construction process. - FID ii is a high-load fastener specifically for insulation materials, suitable for insulation thicknesses starting from 60 mm, while FID ii Plus is for thicknesses starting from 100 mm. - Quick and economical installation using Torx T40.
Prevent thermal bridging by installing insulation flush! Insulation fasteners with wood screws.
◆Compatible Base Materials - 3-layer solid wood - MDF plywood - OSB plywood ◆Functions and Usage - Fasteners are installed using a standard Torx T30 bit for flush mounting. - Use the dedicated tool T T S for embedding installation. Screw in the fasteners for precise installation positioning. Insert a separately sold cap into the countersink area to achieve a flush surface with the insulation material. - Rotate the disk of the dedicated tool T T S to achieve a flush surface with the insulation material. Install the fasteners without going too deep.
Construction screw fasteners with self-drilling screws featuring Delta-Seal coating for thin steel plates.
◆Applicable Base Material ・Thin steel plate / trapezoidal metal sheet, maximum thickness 1.5mm ◆Function and Usage ・Installation by fitting to the actual item through insulation material without pre-drilling. ・The appropriate driver bit is European type Phillips #2. ・Quick and easy installation with a cordless electric impact driver. ・Total thickness includes a load-free layer such as an adhesive layer.
Fastening for innovative EPS (bead foam polystyrene) insulation boards for various base materials.
◆Applicable Base Materials - European Technical Certification Base Material Classification (Normal Concrete, Solid Brick, Perforated Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Perforated Brick - Perforated Limestone Brick - ALC - Lightweight Concrete - Sepa Parpaing (French-made Brick), etc. ◆Function and Usage - Embedded into the insulation material through the perforated holes, using a setting tool to screw in. - The spiral disk and screw rotate simultaneously through the insulation material with the same pitch, locking in a co-rotating manner against the base material. - Subsequently, the steel screw enters the expansion zone, compressing the compression zone up to a few millimeters thick, securing to the base material. - The setting is complete when the top surface of the insulation material and the bottom surface of the marking ring are flush.
Economical and strong screw fastening for insulation materials.
◆Applicable Base Materials - European Technical Assessment Base Material Classification (Normal Concrete, Solid Brick, Hollow Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Hole Brick - Perforated Limestone Brick - Lightweight Aggregate Concrete - ALC, etc. ◆Functions - On-site matching construction through the drill hole in the insulation material. - Seat excavation construction using the dedicated tool Setting Tool CS (sold separately). - As an option, use the dedicated tool Setting Tool CS in reverse for flush installation. - When using the dedicated tool Setting Tool CS in reverse, the stop disk is installed flush with the surface of the insulation material. - After seat excavation construction, install the circular cover (sold separately). - No plug cap is required for flush installation. - For sizes of other types TermoZ CS ii 8 DT 110 V, please refer to the separate catalog.
Thermal bridge reduction with external thermal insulation composite system (ETICS) specification using floating installation method.
◆Applicable Base Materials - Concrete - Solid limestone bricks - Perforated bricks - Construction bricks - Lightweight concrete hollow blocks - ALC - Perforated limestone bricks
Thermal bridge reduction for externally insulated composite systems (ETICS) with German general building certification using floating installation methods.
◆Applicable Base Materials - Ordinary concrete, with and without cracks - Perforated bricks - Perforated limestone bricks - Lightweight concrete hollow blocks - Solid limestone bricks - Solid bricks - Other applicable base materials - ALC
